Metal Optical Fiber Adapters , Optic Bare Fiber Adapter ST FC LC ST Round

Optical Fiber Adapter ST, Optic Bare Fiber Adapter ST FC LC ST Round Metal

The optical fiber is connected through the opening sleeve inside adapter, in order to ensure the

highest performance of optical fiber jumper. In order to fixed on various panel, a variety of fixed

flange adapters design and manufactured.

Hybrid adapter can connected different types of fiber optic patch cord, also provide APC end face

connection, duplex or multi-fiber high density installation.

Bare fiber adapter is a kind of professional auxiliary tool for optical fiber test, especially for fiber

emergency repair and temporary connection.

Model: FC/PC, SC/PC,ST/PC,LC/PC available

Main characteristics:

• Low insertion loss
• Good repeatability
• Easy to use
• Length: 40MM, Diameter: 13MM
• Temperature cycle test:-40-+80 °C
• Interchangeability < 0.2dB
• Convenient operation, can be observed by the naked eye
• Reusable, single mode / multi-mode fiber can be used
• Low insertion loss, good reflecting inhibition

Application

1. Bare fiber connector device production
2. Experiment fiber test
3. Testing fiber on the reel
4. Optical fiber through connection test
5. Two-way communication during optical-fiber cable installation and maintenance
6. First-aid repair,temporary connection and testing on optical fiber project.

Specification

How to use:

1. Strip the fiber coating layer (15-20mm) and cleaned with alcohol;

2. Press down the optical fiber adapter switch, push the fiber along the guiding hole slowly until out

of the ceramic ferrule (5-6mm),then relax and open ;

3. Use ruby knife delimit fiber bottom gently so as to expose part of fiber, break off the fiber.

Bare Fiber Adapter Round Package: Blister Box FC SC LC ST is the same