Outside dimension (LxWxH)	430x180x125 (mm)
Weight (excluding outside box)	2500g-2825g
Number of inlet/outlet ports	3 (pieces) on each side (total 6 pieces)
Diameter of fiber cable	Φ8—Φ20 (mm)
Capacity of FOSC	Bunchy: 12—96 (Cores) Ribbon: max. 144(Cores)
Internal diameter	320x120x100(mm)
Splice tray capacity	Bunchy:12, 24(cores); Ribbon:3 (pieces)

Main components

No.		Name of components	Quantity	Usage	Remarks
1		Housing	1 set	Protecting fiber cable splices in whole
2		Fiber optic splice tray (FOST)	max. 6 pcs (bunchy) max. 4pcs (ribbon)	Fixing heat shrinkable protective sleeve and holding fibers
3		Foundation	1 set	Fixing reinforced core of fiber- cable and FOST
4		Seal fitting	1 set	Sealing between FOSC cover and FOSC bottom
5		Port plug	6 pieces	Sealing empty ports
6	Pressure testing valve		1 set	After injecting air, it is used for pressure testing and sealing testing	Configuration as per requirement
7	Earthing deriving device		1 set	Deriving metallic components of fiber cable in FOSC for earthing connection	Configuration as per requirement

Main accessories and special tools

No.	Name of accessories	Quantity	Usage	Remarks
1	Heat shrinkable protective sleeve		Protecting fiber splices	Configuration as per capacity
2	Nylon tie		Fixing fiber with protective coat	Configuration as per capacity
3	Insulation tape	1 roll	Enlarging diameter of fiber cable for easy fixing
4	Seal tape	1 roll	Enlarging diameter of fiber cable which fits in with seal fitting	Configuration as per specification
5	Hanging hook	1 set	For aerial use
6	Earthing wire	1 piece	Putting through between earthing devices
7	Abrasive cloth	1 piece	Scratching fiber cable
8	Labeling paper	1 piece	Labeling fiber
9	Special wrench	3 pieces	Fixing bolts, tightening nut of reinforced core
10	Measuring paper	1 piece	To measure circle, of which its diameter is enlarged with seal tape
11	Buffer tube	to be decided by customers	Hitched to fibers and fixed with FOST, managing buffer	Configuration as per requirement
12	Desiccant	1 bag	Put into FOSC before sealing for desiccating air.

figure 1 figure 2

fiber splice box inline type top fibre splice box horizontal type side

box is made of high strength engineering plastic PC material, perfect handworks. (figure 1&2)
the closure is with stainless steel blots to open and close the box, standard equipped with special wrench tool. (figure 1&2)

figure 3 figure 4

there is a label on the top of the fiber junction box, the content mainly include: product name, model, capacity, production date. see figure 3
the inside is total sealed with red rubber circle, waterproof, dustproof. can be used outside harsh environment , underground,manhole, wall mount, pole mounted,aerial,etc. see figure 4

figure 5 figure 6

the cable ports is: 3 inport, 3 outports. cable diameter seperately is: 8-20mm, 8-16mm, 8-13mm,like figure 5 &6
the air valve is optional when order. if customer need, will equipped with it, like figure 6.

figure 7 figure 8

fiber splice closure can install maximum 4 pcs 24 fibers trays, each tray with plastic sleeve holders. see figure 7.

all the splice tray is overlap with each other, and fix on the closure with screws, so it will not broken on long transportation. see sigure 8.

Product Tags:

Orizontal Fiber Optic Splice Closure , UnderGround Fiber Joint Closure 96 Core

Fiber Optic Termination Box