Advanced internal structure design
Easy to re-enter, it never requires re-entry tool it
The closure is spacious enough for winding and storing fibers
Fiber Optic Splice Trays(FOSTs) are design in SLIDE-IN LOCK and its opening angle is about 90°
The curved diameter meets with international standard
Easy and fast to increase and reduce FOSTs
Straight-through for uncutting and branching for cutting the fibers

Specification

Outside dimension (LxWxH)	450x220x110 (mm)
Weight (excluding outside box)	2750g-3200g
Number of inlet/outlet ports	3in, 3 out
Diameter of fiber cable	Φ8—Φ23 (mm)
Capacity of FOSC	Bunchy: 6—96 (Cores) Ribbon: max. 216 (Cores)
ambient temperature	-40 to 65℃.

-----------------------------------------------------------------------------------------------------------------------------------------------------

Main component

No.		Name of components	Quantity	Usage	Remarks
1		Housing	1 set	Protecting fiber cable splices in whole	Internal diameter: 378x136 (mm)
2		Insert plate	2 pairs	Fixing the housing	175x56x30(mm)
3		Fiber optic splice tray (FOST)	Max 4 pieces (either bunchy or ribbon)	Fixing heat shrinkable protective sleeve and holding fibers	Suitable for: Bunchy:6,12,24(cores) Ribbon:3,6 (pieces)
4		Foundation	1 set	Fixing reinforced core of fiber- cable and FOST
5		Seal fitting	1 set	Sealing between FOSC cover and FOSC bottom
6		Port plug	6 pieces	Sealing empty ports
7	Pressure testing valve		1 set	After injecting air, it is used for pressure testing and sealing testing	Configuration as per requirement
8	Earthing deriving device		1 set	Deriving metallic components of fiber cable in FOSC for earthing connection	Configuration as per requirement

Main accessories and special tools

No.	Name of accessories	Quantity	Usage	Remarks
1	Heat shrinkable protective sleeve		Protecting fiber splices	Configuration as per capacity
2	Nylon tie		Fixing fiber with protective coat	Configuration as per capacity
3	Insulation tape	1 roll	Enlarging diameter of fiber cable for easy fixing
4	Seal tape	1 roll	Enlarging diameter of fiber cable which fits in with seal fitting	Configuration as per specification
5	Hanging hook	1 set	For aerial use
6	Earthing wire	1 piece	Putting through between earthing devices
7	Abrasive cloth	1 piece	Scratching fiber cable
8	Labeling paper	1 piece	Labeling fiber
9	Special wrench	3 pieces	Fixing bolts, tightening nut of reinforced core
10	Measuring paper	1 piece	To measure circle, of which its diameter is enlarged with seal tape
11	Buffer tube	To be decided by customers	Hitched to fibers and fixed with FOST, managing buffer	Configuration as per requirement
12	Desiccant	1 bag	Put into FOSC before sealing for desiccating air.

Application

Product Tags:

fiber optic internet installation

4-core fiber optic cable multimode

Inquiry Cart 0