YINGDA TECHNOLOGY LIMITED
SHENZHEN YINGDA PHOTONIC CO.,LTD. Fiber Optic Connects The World
Add to Cart
The optical gel that is also used in the mechanical splice reduces the effects of imprecise cuts and a possible gap between the end faces. The versatile design is used for splicing optical fibers with buffer coating diameters of 250μm and 900μm, providing high performance connections of multi-mode and single mode fibers.
Mechanical splicers is widely used in ftth network for drop cable application, and also suitable for connecting pigtails in distribution boxes,splice closures, wall outlets for repair damaged optical cables.
Features
Application
Technical Specification
| Model | YDMSC30 |
| Bare fiber mechanical Splicer dimension | 37*7*3mm |
| Outer protection box dimension | 90*8*6mm |
| Main body material | PEI |
| V Groove material | Aluminum |
| Outer Protection box material | ABS |
| Applicable of cable | 2.0*3.0mm flat drop cable |
| Bare fiber diameter | 125um (657A&657B) |
| Cladding diameter | 250um |
| Applicable fiber mode | Single mode |
| Insertion loss on average | ≤0.3dB (1310&1550nm), typical 0.1dB |
| Return loss | ≥45dB |
| Optical fiber tensile strength | ＞6N |
| Cable tensile strength | ＞20N |
| Operating temperature | —40~+85℃ |
| High and low temperature cycling experiment (168h) | △IL≤0.5dB |
| High temperature and high humidity experiment (96h) | △IL≤0.5dB |
| Drop experiment (1.5m high cement floor, total 8 times) | △IL≤0.5dB |
| Net weight | 5g |
